Notices for Anti-corrosion Galvanizedl Steel Pipe Transportation

　　The transportation of anticorrosive galvanized steel pipe is different from that of ordinary galvanized steel pipe. Because of the anticorrosive coating on the outer wall, the following problems must be paid attention to during transportation.

　　Firstly, when lifting anti-corrosion API 5L X70 Galvanized Steel Pipe, soft sling or rope without damaging the anti-corrosion layer should be adopted to avoid damaging the anti-corrosion layer.

　　Secondly, the anti-corrosion galvanized steel pipe can not be treated with casing during transportation, so it is easy to cause damage to the anti-corrosion coating.

　　Third: Before the anticorrosive galvanized steel pipe goes down the ditch, it is necessary to clean the ditch so that the bottom of the ditch is smooth and there are no stones, bricks or other debris. If the upper layer is very hard, it should first pave 100 mm soft fine soil at the bottom of the trench. After the anti-corrosion galvanized steel pipe goes down the trench, it is not allowed to move the galvanized steel pipe with a pry bar, let alone push the galvanized steel pipe directly down the trench.